Brother P-touch 2600, 2610 User Manual page 79

EXAMPLE
To cut a stamp:
1
Enter the text and insert a stamp film cassette in the tape compartment.
2
Hold down
_
3
Press
p
4
Press
then automatically cut it off.
To affix a stamp:
5
Remove the stamp frame from around the stamp
film holder ink pad, one side at a time, and then
remove the protective seal covering the ink pad
and the backing paper from the stamp stencil film.
6
With the glossy side of the stamp stencil film
upward, align one of its ends with the slit on the
side of the stamp film holder.
72
c U
and press .
.
to engrave the stamp stencil film, and
Glossy side
Tape end
Slit