Brother P-touch 2600, 2610 User Manual page 102

6 Press e or h until the desired number of copies is displayed, or use the number keys
to type in the number.
7 Press p (or _).
TZ-Tape
The set number of labels is printed. The number of the copy being printed is displayed.

If the TZ Cut function is set to ON, each TZ label is automatically cut off after it is printed.
This completes the procedure for TZ tapes; disregard steps 8 and 9.
AV-Label
CUT MENU appears in the display. Continue with step 8 to finish printing.
Press e or h until the desired setting (EACH LABEL or AFTER LAST) is displayed.
8
If EACH LABEL is selected, each label is cut off after it is printed.
If AFTER LAST is selected, the string of labels are cut off only after they have all been printed.
Press p or _ to begin printing the labels. The number of the copy being printed is displayed.
9
EXAMPLE
To print three labels with numbers 1, 2 and 3:
1
Hold down
_
2
Press
3
Make sure that just "1" is flashing, and then press
_
.
3
4
Press
c O
and press
.
.
.
95