Brother P-touch 2600, 2610 User Manual page 25

6 Connect the P-touch 2600/2610 to the com-
puter using the enclosed USB interface cable
as described on page 6, and then turn on the
P-touch 2600/2610. The first Found New
Hardware Wizard dialog box appears.
7 Select "Install the software automatically
(Recommended)", and then click the Next
button. A dialog box appears, warning that
the software has not passed Windows Logo
testing.
8 Click the Continue Anyway button to con-
tinue with the installation. A Found New
Hardware Wizard dialog box appears, indi-
cating that the Found New Hardware Wizard
has finished installing the software for the
PT-2600/2610.
9 Click the Finish button. A Driver Setup dialog
box appears, indicating that the printer driver
has been installed.
0 Select "Yes, restart immediately.", click the
Finish button to restart the computer, and
then remove the CD-ROM from the com-
puter.
18