Brother P-touch 2600, 2610 User Manual page 23

6 Click the Finish button. A dialog box
appears, indicating that the installation is fin-
ished.
7 Select "Yes, I want to restart my computer
now." (or "Yes, restart immediately" if the
printer driver was installed separately), click
the Finish button to restart the computer, and
then remove the CD-ROM from the com-
puter.
REPLACING OR ADDING THE PRINTER DRIVER
1 Turn off the P-touch 2600/2610, and then disconnect it from the computer.
2 Insert the enclosed CD-ROM into the com-
puter's CD-ROM drive. A dialog box auto-
matically appears, allowing you to select
what to install.

If the dialog box does not automatically
appear, double-click "My Computer" on
the desktop, and then double-click the
CD-ROM drive containing the CD-ROM.
(For Windows
in the Start menu, and then double-click
the CD-ROM drive containing the CD-
ROM.)
Next, double-click "Setup.exe" to
display the dialog box.
3 Click the lower button (Driver). A Driver
Setup dialog box appears, allowing you to
select whether to replace, add or delete the
PT-2600/2610 printer driver.
4 Select either "Replace with new Brother
PT-2600/2610." or "Add Brother PT-2600/
2610.", and then click the Next button.
16
®
XP, click "My Computer"