Outdoor unit type
Model
Installation combination
You must install the indoor unit that uses R-410A only.
If sum capacity of the combined indoor units exceeds the capacity of an outdoor unit, the capacity of each indoor unit is
reduced below the rated capacity. Therefore, keeping the combination of indoor units within the capacity of an outdoor
unit is recommended.
Outdoor unit
AM060TXMDEH
Accessories
You must keep the following accessories until the installation is finished.
Hand over the installation manual to the customer after finishing the installation.
Manual (1)
Shape
Cooling and Heating
Outdoor unit capacity (HP)
6
Drain plug (1)
1phase
The maximum number of
connectable indoor units (ea)
10
Rubber Leg (4)
AM060TXMDEH
Total capacity of the
connected indoor units (kW)
7.8~20.2
Drain cap (3)
5