Samsung AM TXMDEH Series Installation Manual page 12

Installation and base ground work for an outdoor unit
Base ground work
Drain hole 150 mm or more
< When installing on the ground >
The outdoor unit should be supported within the range of measurement below for base ground work.
Anchor bolt position
When the outdoor unit needs to be supported, fix it with wire as shown in the picture.
- Slightly unwind the four screws on the cover top of the outdoor unit.
- Wind wires round the four screws and fasten the screws again.
- Fix the wires to the ground.
If the outdoor unit is not fixed securely, product may fall and it might cause loss of life or property damage.
Do not install the outdoor unit on a wood palette.
CAUTION
Fix the outdoor unit securely to the base ground with anchor bolts.
The manufacturer is not responsible for the damage occurred by not adhering to the standard of the installation.
To protect the outdoor unit from external condition such as rain, install it on the base ground and connect the
drain pipe to the drainage.
12
horizontally on the ground
620
940
Install the outdoor unit
150 mm or more
< When installing on the roof >
(Unit : mm)