Horizontal Alignment Function - Brother PT-2610 User Manual

2
While still holding down
E
until HALF is displayed.
c
3
Release

HORIZONTAL ALIGNMENT FUNCTION

You can choose to align the text in one of three ways. In addition, if the Length function was
used to set the length of the label, the text will align within the label according to the selected
horizontal alignment setting.
The default setting is LEFT; however, two other settings are also available.
LEFT
CENTER

The horizontal alignment setting can be applied to text printed on both TZ tape and
AV labels.
To change the horizontal alignment setting:
1 While holding down c, press R once, and keep c held down to display the cur-
rent horizontal alignment setting.
2 While still holding down c, continue pressing R until the desired horizontal align-
ment setting is displayed.
3 Release c to apply the selected horizontal alignment setting to the entire text.
92
c
, continue pressing
.
RIGHT