Table of Contents
Advertisement
MS-6734 M-ATX Mainboard
OnChip IDE Channel 0/1
The integrated peripheral controller contains an IDE interface with sup-
port for two IDE channels. Choose [Enabled] to activate each channel
separately. Settings: Enabled, Disabled.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO
mode (0-4) for each of the four IDE devices that the onboard IDE interface
supports. Modes 0 through 4 provide successively increased performance.
In Auto mode, the system automatically determines the best mode for
each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3,
Mode 4.
Primary/Secondary Master/Slave UltraDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver
(Windows 95 OSR2 or a third-party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA/33, Ultra DMA/
66 and Ultra DMA/100 select Auto to enable BIOS support. The settings
are: Auto, Disabled.
VIA OnChip PCI Device
Press <Enter> to enter the sub-menu and the following screen appears:
3-16
Hide quick links:
Advertisement
Table of Contents
