MSI KM4M Series Manual page 50

USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
Disabled
Boot Other Device
Setting the option to Enabled allows the system to try to boot from other
devices if the system fails to boot from the 1st/2nd/3rd boot device.
Settings: Enabled, Disabled.
MSI Reminds You...
Available settings for "1st/2nd/3rd Boot Device" vary depend-
ing on the bootable devices you have installed. For example, if
you did not install a floppy drive, the setting "Floppy" does not
show up.
CPU Internal Cache & External Cache
The item allows you to turn on or off CPU's internal (L1) and external (L2)
cache. Settings: Enabled and Disabled.
CPU L2 Cache ECC Checking
This setting allows you to enable or disable the ECC (Error-Correcting Code)
feature for error detection and correction when data passes through L2 cache
memory. Setting options: Enabled, Disabled.
Swap Floppy
Setting to Enabled will swap floppy drives A: and B:.
Seek Floppy
Setting to Enabled will make BIOS seek floppy drive A: before booting the
system. Settings: Disabled, Enabled.
Boot Up NumLock Status
This setting is to set the Num Lock status when the system is powered on.
Setting to On will turn on the Num Lock key when the system is powered on.
Setting to Off will allow users to use the arrow keys on the numeric keypad.
The system will boot from USB-interfaced floppy drive.
The system will boot from any USB-interfaced ATAPI
ZIP drive
The system will boot from the USB-interfaced CD-ROM.
The system will boot from the USB-interfaced HDD.
The system will boot from the Network drive.
Disable this sequence.
BIOS Setup
3-9