Bissell PROHEAT 2X REVOLUTION PET 2457F User Manual page 5

Assembly
WARNING
Do not plug in your machine until you are familiar with all instructions
and operating procedures.
In step 3, you will need to use a Phillips-head screwdriver.
1
First, insert the
(aluminum)
Upper Handle
at the top of the
base until you
hear a "click".
Do NOT put
the clean tank
on the machine
until Step 5.
3
Use a Phillips-head screwdriver
to secure the screw (found
taped to upper handle) into
the Carry Handle.
6
Press Part B (the larger
piece) down, onto Part
A of the Rinse & Storage
Tray. (There are 2 hooks
on each side of Part A
that hook under Part B.)
2
click
Next, align the Carry Handle with the slots
on either side of the base (behind the
Power Button and Cleaning Mode Switch).
The Carry Handle will "click" into place.
4
Wrap the cord around
the Carry Handle and
Quick Release Cord Wrap
7
Your tray is assembled
and ready for use.
5
Side
View
At the bottom of the
Upper Handle, align the
Clean Water Tank with
the grooves and slide
the tank into place.
8
The tools and Water Rinse
Cup can also be stored on
the Rinse & Storage Tray.
BISSELL.com
5