Bissell PROHEAT 2X REVOLUTION PET 2457F User Manual page 14

Cleaning Machine After Use
1
First, fill the Clean
Water Tank with
warm tap water
and then empty it
all to rinse. Then fill
again with warm
tap water and
return the tank to
the machine. Twist
cap back on tightly.
Rinsing Brush Roll & Nozzles
1
Set your machine on the Rinse & Storage
Tray and OPEN the accessory hose door.
Make sure the machine is not reclined.
The machine should be in its upright
position to prevent water splashing.
3
Fill the tray with water using the Water Cup.
14
BISSELL.com
2
2
Fill the Water Rinse Cup with fresh tap
water to the fill line printed on the cup.
4
Turn the machine ON. This will begin to
wash and rinse the Brush Rolls. After 6-8
seconds CLOSE the accessory hose door
to extract the water from the tray.
To flush and rinse machine:
Turn the machine ON and
press the Spray Trigger for 15
seconds while making back
and forth passes on a section
of carpet. Release the trigger
and suck up the water.
Empty the Clean Water Tank
and let dry before storing.
Wipe your machine's exterior
with a soft cloth.