Technical Specifications; Power Supply Specifications; Copper Ethernet Port Specifications; Supported Networking Standards - Siemens SIMATIC NET Installation Manual

Technical Specifications

This section provides important technical specifications related to the device and
available modules.
5.1

Power Supply Specifications

a
(T) denotes time-delay fuse.
b
This is the same power supply for both AC and DC.
5.2

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RMC30.
Speed
Connector
Duplex
Cable Type
Wiring Standard
Maximum Distance
Isolation
a
Auto-negotiating.
b
Shielded or unshielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.3

Supported Networking Standards

RUGGEDCOM RMC30
Installation Manual, 04/2021, C79000-G8976-1008-10
Power Minimum Input
Supply Type
24 VDC 18 VDC
48 VDC 36 VDC
b
HI 88 VDC
85 VAC
a
10Base-TX
RJ45
a
FDX/HDX
b
> CAT-5
c
TIA/EIA T568A/B
d
100 m (328 ft)
e
1.5 kV
Parameter 10Base-FL
IEEE 802.3 Yes No
Maximum Input Internal
Fuse Rating
36 VDC 3.15A (T)
59 VDC
300 VDC
264 VAC
100Base-FX
5
Max. Power
a
Consumption
3 W
Notes
10Base-T
21