Siemens SIMATIC NET Installation Manual page 17

Installing the Device
2.3.1 Mounting the Device on a DIN Rail
Removing the Device
To remove the device from a DIN rail, do the following:
1.
2.
3.
8
Insert a flathead screwdriver into the slot of the sliding release and move it
down.
1
DIN Rail
1
DIN Rail Adapter
2
Figure 2.2 Removing the Device from a DIN Rail
Swing the bottom of the device away from the DIN rail.
Lift the device off the DIN rail.
2
Installation Manual, 04/2021, C79000-G8976-1008-10
3
1
2
1
RUGGEDCOM RMC30