Calculated Industries 8515 User Manual

Keystroke
DIMENSION EXAMPLES
[On/C] [On/C]
Linear Conversions
40 [Feet] [Feet]
Convert 16 feet to other dimensions: [Conv] [1] (Tile)
[1] (Tile)
Keystroke Display
[1] (Tile)
[On/C] [On/C] 0.
Number of Bricks/Blocks
16 [Feet] 16
FEET
for a Wall
[Conv] [Yds] 5.333333
YD
[Conv] [Feet] 16 0 Find the number of (face) bricks or concrete blocks
FEET INCH
needed to do a 40' x 3' wall.
[Conv] [Inch] 192
INCH
[Conv] [Met] 4.8768
M
Keystroke
Square & Cubic Conversions
[On/C] [On/C]
Convert 25 square feet to other square dimensions:
40 [Feet] [x] 3 [Feet] [=]
[Conv] [2] (Brick)
Keystroke Display
[Conv] [3] (Block)
[On/C] [On/C] 0.
Number of Paver Bricks
25 [Feet] [Feet]* 25.
SQ FEET
Find the number of (paver) bricks required for a 3'
[Conv] [Yds] 2.777778
SQ YD
x 18' walkway.
[Conv] [Met] 2.322576
SQ M
Keystroke
Convert 25 cubic feet to cubic yards. Then find
cost at $50 per yard:
[On/C] [On/C]
3 [Feet] [x] 18 [Feet] [=]
Keystroke Display
[Conv] [2] (Brick)
[On/C] [On/C] 0.
[2] (Brick)
25 [Feet] [Feet] [Feet]* 25.
CU FEET
Number of 4'x8' Sheets
[Conv] [Yds] 0.925926
CU YD
[x] 50 [Conv] [•] 46.30 How many 4' x 8' drywall sheets do you need for
a wall measuring 20' 5" x 15'?
*Press [Feet] twice for square feet; press [Feet] three
times for cubic feet. Keystroke
Dimensional Math
[On/C] [On/C]
20 [Feet] 5 [Inch] [x] 15 [Feet] [=]
Keystroke Display
[Conv] [4] (4x8 Sheet)
[On/C] [On/C] 0.
Gallons of Paint
10 [Inch] [+] 2 [Feet] 5 [Inch] [=] 3 3
FEET INCH
How many gallons of paint will you need to cover
2 [Feet] [x] 1 [Feet] 2 [Inch] [=] 2.333333
SQ FEET
a wall that measures 32' x 25'?
5 [Feet] [-] 1 [Inch] 3 [/] 4[=] 4 10-1/4
FEET INCH
Keystroke
10 [Feet] [÷] 1 [Inch] 1 [/] 4 [=] 96.
59 [Feet] [Feet] [+] 10 [%] 64.9
SQ FEET [On/C] [On/C]
"Square-up"/Diagonal 32 [Feet] [x] 25 [Feet] [=]
[Conv] [5] (Paint)
"Square up"(find the diagonal to ensure a perfect
square) a concrete pad that has a length of 10 feet
How many square feet will 2 gallons cover?
and a width of 20 feet.
Keystroke
Keystroke Display
2 [Conv] [5] (Paint)
[On/C] [On/C] 0.
Rolls of Wallpaper
10 [Feet] [Conv] [x] [+] 100.
SQ FEET
Find the number wallpaper rolls needed for a wall
20 [Feet] [Conv] [x] 400.
SQ FEET
measuring 10' 6" x 12'.
[=] 500.
SQ FEET
Keystroke
[Conv] [÷] 22 4-5/16
FEET INCH
[On/C] [On/C]
MATERIAL EXAMPLES 10 [Feet] 6 [Inch] [x] 12 [Feet] [=]
[Conv] [6] (Wallpaper)
Material Calculations
Board Feet Calculations
The following calculations are based on common
Find the total board feet for three 2" x 4" x 14'
industry standards (see " Default Values for
boards:
Materials ") for estimating quantities of materials.
Keystroke
You may need to adjust your calculations if you use
values other than specified. Also, remember to factor
[On/C] [On/C]
in a waste allowance when ordering materials.
2 [Inch] [x] 4 [Inch] [x] 14 [Feet] [=] 1344.
[Conv] [7] (Board Feet)
Tons of Gravel
[x] 3 [=]
How much gravel do you need to cover a 36' x 11'
Number of Studs
driveway 2" deep?
How many 16" on-center studs are required for a
Keystroke Display
15 feet 6-1/2 inch wall?
[On/C] [On/C] 0.
Keystroke
36 [Feet] [x] 11 [Feet] [ x ] 2 [Inch] [=] 66.
CU FEET
[Conv] [0] (Gravel) 3.18 tn [On/C] [On/C]
15 [Feet] 6 [Inch] 1 [/] 2
Number of Tiles
[Conv] [8] (Studs)
Find the number of 18" tiles required for 40 square
feet of floor area. Also, find the number of 12" and *Automatically includes one stud for the end.
8" tiles.
Display Default Values for Materials
Bundles of Roof Shingles
0. How many bundles of roof shingles will you need
Key (LCD Legend) : Value
40. to cover a 14' x 11' roof?
SQ FEET
Gravel (tn) : 1 ton equals 0.77 cubic yards (or
17.78 (18 in)
Keystroke Display
equal to 1.3 tons per cubic yard)
40.00 (12 in)
[On/C] [On/C] 0.
Tile: 18 inch, 12 inch, 8 inch, 6 inch, 4 inch, 2
90.00 (8 in)
14 [Feet] [x] 11 [Feet] [=] 154.
SQ FEET
inch, 1 inch sizes (Note: calculator does not
[Conv] [9] (Roof Bundle) 4.62 rF bn
adjust for grout)
Brick (F br or P br) : 21 square inch for "Face"
KEY DEFINITIONS
bricks or 32 square inch "Paver" bricks. Based
on Modular U.S. brick (3-5/8" x 2-1/4" x 7-5/8")
[On/C] — On/Clear Key
Display
including 3/8" mortar (4" x 2-5/8" x 8")
Turns power on. Pressing once clears the display.
0.
Pressing twice clears all temporary values. Block (bL) : 128 square inches includes 1/2"
120.
SQ FEET mortar
[Off] — Off Key
822.86 F br
Turns all power off, clearing all non-permanent 4'x8' Sheet (Sh) : 32 square feet (typically used for
135.00 bL
registers. drywall or sheet material).
[%] — Percent Key Paint (GL) : 1 gallon covers 350 square feet
Four-function percent key.
Wallpaper (rl) : 1 roll covers 56 square feet
[+] [–] [x] [÷] [=] (U.S. double roll)
Display Arithmetic operation keys.
Board Feet (bF) : 1 board ft. = 144 cubic inches
0. [0] — [9] and [ • ]
Studs (St) : 16 inch on-center (Note: one stud is
54. Digits used for keying-in numbers.
SQ FEET
automatically added to the end)
370.29 F br
Dimension Keys
Roof Bundles (rF bn) : 1 bundle equals 33.33
243.00 P br
square feet
Entering Square or Cubic
To label a dimension as "square" or "cubic," enter the
Memory
value, then press the desired dimension key twice for
square and three times for cubic. For example, to
[Conv] [+] (M+) — Store value in semi-perma-
enter 25 cubic yards, press 25 [Yds] [Yds] [Yds].
Display nent memory (e.g., 150 [Conv] [+]). Semi-per-
[Yds] — Yards Key manent means the value is cleared when the
0.
Enters or converts to yards . calculator is turned off.
306.25
SQ FEET
9.57 Sh [Feet] — Feet Key
[Conv] [=] (MR) — Recall memory value
Enters or converts to feet as whole or decimal
(e.g., if 150 has been stored in Memory,
numbers. Also used with the [Inch] and [/] keys
pressing [Conv] [=] will display 150).
for entering Feet-Inch values (e.g., 6 [Feet] 9
[Inch] 1 [/] 2). Repeated presses during conver- [Conv] [On/C] (MC) — Clears memory value.
Display sions toggle between Feet-Inch and Decimal Feet.
[Off] — Clears memory value.
0. [Inch] — Inch Key
Enters or converts to inches . Entry can be whole Reset
800.
SQ FEET
or decimal numbers. Also used with the [/] key for
2.29 GL If your calculator should ever "lock up," press Reset
entering fractional inch values (e.g., 9 [Inch] 1 [/]
– a small hole located above the [Met] key/upper
2). Repeated presses during conversions toggle
right – using the end of a paper clip.
Display between Fractional and Decimal Inches.
Accuracy
[Met] — Meter Key
700.
SQ FEET
The normal display is seven digits; fraction display
Enters or converts to meters .
four digits. Fraction resolution displays values to the
[ / ] — Fraction Bar Key
nearest 16th of an inch, unless changed by user. Each
Used to enter fractions. Fractions can be entered
calculation is carried out internally to ten digits.
as proper (1/2, 1/8, 1/16) or improper (3/2, 9/8).
Display
Auto Shut-Off & Batteries
Fraction Resolution
0. Auto Shut-Off : After 8-12 minutes of non-use.
Your calculator is set to display fractional values to
126. Batteries Included: Two LR-43 batteries.
SQ FT
the nearest 16th of an inch. 1/64 resolution can be
2.25 rl
displayed by pressing [/] with the value in the dis- Battery-Life : 575 hours of actual use.
play. The fractional resolution of the calculator can
The Model 8515 ProjectCalc uses
be permanently set by pressing [Conv] [/] with a
two (2) long-life LR-43 batteries,
clear (zero) display. Repeat presses of the [/] will which should last for approxi-
then revolve through the available settings: 1/16,
mately 575 hours of actual
Display
1/32, 1/64, 1/2, 1/4 and 1/8.
use. To replace the batteries,
0.
use a small Phillips
Convert Key Functions
CU INCH head screwdriver
[Conv] — Convert Key
9.33 bF and unscrew
Used with the dimensional keys to convert
the three small
27.99
between dimensions or with other keys to access
screws on the
special functions:
back of the calculator.
[Conv] [ % ] — Pi (π) Constant 3.141593 Carefully remove the
lower back housing.
[Conv] [ x ] — x2
Remove the old batteries from the clips and replace
Display
[Conv] [ ÷ ] — Square Root (÷)
with two new LR-43 batteries. Make sure the positive
0.
[Conv] [ – ] — Sign (+ / –) Toggle sides (+) are facing up. Replace the calculator back-
15 6-1/2
FEET INCH
plate and re-attach the three screws. NOTE:
[Conv] [ • ] — Per Function
13. St
Replacement LR-43 batteries are available at most
"Cost" function allows you to compute a total material cost
discount or electronics stores. Or, you may call
given a unit dimension and an entered Per Unit Cost.
Calculated Industries at 1-800-854-8075.
WARRANTY EJEMPLOS DE DIMENSIÓN
Calculated Industries ("CI") warrants this product against Conversiones Lineales
defects in materials and workmanship for a period of one
Convierte 16 pies a otras dimensiones.
(1) year from the date of original consumer purchase in the
U.S. If a defect exists during the warranty period, CI at its Teclas
option will either repair (using new or remanufactured
[On/C][On/C]
parts) or replace (with a new or remanufactured calculator)
16 [Feet]
the product at no charge.
[Conv][Yds]
[Conv][Feet]
THE WARRANTY WILL NOT APPLY TO THE PRODUCT IF IT
[Conv][Inch]
HAS BEEN DAMAGED BY MISUSE, ALTERATION, ACCI-
DENT, IMPROPER HANDLING OR OPERATION, OR IF [Conv][Met]
UNAUTHORIZED REPAIRS ARE ATTEMPTED OR MADE.
Conversiones Cuadradas y Cúbicas
SOME EXAMPLES OF DAMAGES NOT COVERED BY WAR-
Convertir 25 pies cuadrados a otros cuadrados.
RANTY INCLUDE, BUT ARE NOT LIMITED TO, BATTERY
LEAKAGE, BENDING, OR VISIBLE CRACKING OF THE LCD,
Teclas
WHICH ARE PRESUMED TO BE DAMAGES RESULTING
[On/C][On/C]
FROM MISUSE OR ABUSE.
25[Feet][Feet]*
[Conv][Yds]
Warranty Repair Service — U.S.A.
[Conv][Met]
To obtain warranty service in the U.S., ship the product
Convertir 25 pies cúbicos a yardas cúbicas. Luego
postage paid to Calculated Industries (address and web site
saber el costo a $50 por yarda.
listed on opposite page). Please provide an explanation of
the service requirement, your name, address, day phone
Teclas
number and dated proof of purchase (typically a sales
[On/C][On/C]
receipt). If the product is over 90 days old, include pay-
25[Feet][Feet][Feet]*
ment of $6.95 for return shipping and handling within the
[Conv][Yds]
contiguous 48 states. (Outside the contiguous 48 states,
please call CI for return shipping costs.) [x]50[Conv][•]
*Presione [Feet] dos veces para pies cuadrados; pulse
A repaired or replacement product assumes the remaining
[Feet] tres veces para pies cúbicos.
warranty of the original product or 90 days, whichever is
Matemática Dimensional
longer.
Teclas
Non-Warranty Repair Service – U.S.A.
[On/C][On/C]
10[Inch][+]2[Feet]5[Inch][=]
Non-warranty repair covers service beyond the warranty
period or service requested due to damage resulting from
2[Feet][x]1[Feet]2[Inch][=]
misuse or abuse.
5[Feet][-]1[Inch]3[/]4[=]
10[Feet][÷]1 pulgada 1[/]4[=]
Contact Calculated Industries to obtain current product
59[Feet][Feet][+]10[%]
repair information and charges. Repairs are guaranteed for
90 days. "Cuadrado hacia arriba"/Diagonal
"Cuadrados hacia arriba"(encuentre el diagonal
Repair Service – Outside the U.S.A.
para asegurar un cuadrado perfecto) un piso de
concreto mide 10 pies de largo y 20 pies de ancho.
To obtain warranty or non-warranty repair service for
Teclas
goods purchased outside the U.S., contact the dealer
through which you initially purchased the product. If you
[On/C][On/C]
cannot reasonably have the product repaired in your area,
10[Feet][Conv][x][+]
you may contact CI to obtain current product repair infor-
20[Feet][Conv][x]
mation and charges, including freight and duties. (CI's
[=]
address and web site are listed on opposite page)
[Conv][÷]
Disclaimer
EJEMPLOS DE MATERIAL
CI MAKES NO WARRANTY OR REPRESENTATION, EITHER
EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT'S
Calculaciones de Material
QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS
Las siguientes calculaciones son basadas en la indus-
FOR A PARTICULAR PURPOSE. AS A RESULT, THIS PROD-
tria común
UCT, INCLUDING BUT NOT LIMITED TO, KEYSTROKE PRO- (mire los valores usados en la siguiente página)
para estimar cantidades de material. Usted talvez tenga
CEDURES, MATHEMATICAL ACCURACY AND PREPRO-
GRAMMED MATERIAL, IS SOLD "AS IS," AND YOU THE que hacer algunos ajustes a sus calculaciones si usa
PURCHASER ASSUME THE ENTIRE RISK AS TO ITS QUALI-
otros valores. También recuerde que al ordenar material
TY AND PERFORMANCE.
debe de incluir el factor de material desperdiciado.
Toneladas de Grava
IN NO EVENT WILL CI BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
Cuanta grava necesita para cubrir un entrada de
RESULTING FROM ANY DEFECT IN THE PRODUCT OR ITS
carros de 36'x11' de 2' de profundidad?
DOCUMENTATION.
Keystroke
The warranty, disclaimer, and remedies set forth above are [On/C] [On/C]
exclusive and replace all others, oral or written, expressed or
36 [Feet] [x] 11 [Feet] [ x ] 2 [Inch] [=]
implied. No CI dealer, agent, or employee is authorized to
[Conv] [0] (Grava)
make any modification, extension, or addition to this warran-
Número de Azulejos
ty. Some states do not allow the exclusion or limitation of
implied warranties or liability for incidental or consequential
Encuentre el número de azulejos del tamaño de 18
damages, so the above limitation or exclusion may not apply pulgadas que sea requirido para el área de un piso de
to you. This warranty gives you specific rights, and you may
40 pies cuadrados. Tambien, encuentre el número de
also have other rights, which vary, from state to state.
azulejos del tamaño de 12 pulgadas y 8 pulgadas.
Teclas Pantalla
[On/C][On/C] 0.
40[Feet][Feet] 40.
SQ FEET
[Conv][1](Azulejas) 17.78 (18 )
INCH
[1](Azulejas) 40.00 (12 )
INCH
Pantalla
[1](Azulejas) 90.00 (8 )
INCH
0.
Número de Ladrillos
16.
FEET
o Bloque para Pared
5.333333
YD
16 0 Encuentre el número de (caras) de ladrillo o bloques
FEET INCH
de concreto necesitados para una pared 40'x3'.
192
INCH
4.8768
M Teclas Pantalla
[On/C][On/C] 0.
40[Feet][x]3[Feet][=] 120.
SQ FEET
[Conv][2](Ladrillos) 822.86 F br
Pantalla
[Conv][3](Bloques) 135.00 bl
0.
Número de Ladrillo de Pavimento
25.
SQ FEET
Encuentre el numero de Ladrillo de pavimento
2.777778
SQ YD
requeridos para un camino de 3'x18'.
2.322576
SQ M
Teclas Pantalla
[On/C][On/C] 0.
3[Feet][x]18[Feet][=] 54.
SQ FEET
Pantalla
[Conv][2](Ladrillos) 370.29 F br
0.
[2](Ladrillos) 243.00 P br
25.
CU FEET
Número de Hojas de 4'x8'
0.925926
CU YD
Cuantas hojas de pared sin cemento necesita para
46.30
una pared que mide 20'5"x15'?
Teclas Pantalla
[On/C][On/C] 0.
20[Feet]5[Inch][x]15[Feet][=] 306.25
SQ FEET
Pantalla
[Conv][4](4x8 Hojas) 9.57 Sh
0.
Galones de Pintura
3 3
FEET INCH
Cuantos Galones de Pintura necesita para cubrir
2.333333
SQ FEET
una pared de 32'x25'
4 10-1/4
FEET INCH
96. Teclas Pantalla
64.9
SQ FEET [On/C][On/C] 0.
32[Feet][x]25[Feet][=] 800.
SQ FEET
[Conv][5](Pintura) 2.29 GL
Cuantos pies cuadrados cubrirán 2 galones?
Teclas Pantalla
Pantalla
2[C ][5](P ) 700.
ONV AINT SQ FEET
0.
Rollos de Papel Pintado
100.
SQ FEET
Encuentre el número de rollos de papel necesita-
400.
SQ FEET
dos para una pared de 10'6"x12'
500.
SQ FEET
Teclas Pantalla
22 4-5/16
FEET INCH
[On/C][On/C] 0.
10[Feet]6[inch][x]12[Feet][=] 126.
SQ FEET
[Conv][6](Wallpaper) 2.25 rl
Calculaciones de pies por Tabla
Encuentre el total de pies por tabla para tres 2"x4"
x14' tablas.
Teclas Pantalla
[On/C][On/C] 0.
2[Inch][x]4[Inch][x]14[Feet][=] 1344.
CU INCH
[Conv][7](Bd Feet) 9.33 bf
[x]3[=] 27.99
Número de Tachuelas
Cuantas tachones de 16" en el centro son requeri-
Display
das para una pared de 15 pies 6-a/2 pulgadas?
0.
Teclas Pantalla
66.
CU FEET
[On/C][On/C] 0.
3.18 tn
15[Feet]6[Inch]1[/]2 15 6-1/2
FEET INCH
[Conv][8](Studs) 13. St
*Automáticamente incluye una tachuela para los lados.
.....
CONTINUADO
USER'S GUIDE
P C
ROJECT ALC
P C
ROJECT ALC ®
Model 8516
Yds Feet Inch / Met
Bd Feet Studs Roof Bundle
Conv 7 8 9
x 2
4x8 Sheet Paint Wallpaper
% 4 5 6
+/–
Tile Brick Block
1 2 3
Off
MC Gravel Cost MR M+
= +
0 •
On/C
Calculated Industries
4840 Hytech Drive
Carson City, NV 89706 U.S.A.
Technical Support Line:
1-775-885-4975
Fax: 1-775-885-4949
techsup@calculated.com
www.calculated.com
Software copyrighted and licensed to
Calculated Industries, by Construction
Master Technologies, LLC, 2002.
User's Guide copyrighted by
Calculated Industries, 2002.
ProjectCalc and Calculated Industries
® ®
are trademarks and registered trademarks
of Calculated Industries, Inc.
ALL RIGHTS RESERVED
Designed in the U.S.A.
PATENT PENDING
File: 8516-UG-B