Calculated Industries 4225 Pocket Reference Manual page 8

R
Ç
L
T L
Ç 5
T 5
B
P
Spacing — Stores rebar
on-center spacing. Default
is 18".
Loads Key — Calculates
number of loads for a given
Volume or Length, Width,
and Height (Depth) values
and stored load size.
Load Size — Stores load
size. Load size must be
entered as a cubic value
(e.g., 8 y y y
T L). The default
size is 8 cubic Yards.
Bags — Calculates number
of concrete bags for a given
Volume and stored bag size.
Bag Size — Stores bag
size (Volume per bag of
concrete). Bag size must
be entered as a cubic value
(e.g., • 6 7 f f
f T 5). Default is
0.666667 cubic Feet per
bag, based on a standard
80 pound bag.
Blocks/Bricks —
Calculates the number of
concrete blocks required to
fill a given Area. This key
can also be used for calcu-
lating the number of "face"
or "paver" bricks by storing
a brick size (see Block
Size).
R
OCKET EFERENCE
G — 5
UIDE