Memory Storage Keys (M0-M5) - Calculated Industries 3442 User Manual

(Cont'd)
Examples:
STEPS
Enter into memory
Enter into memory
Recall total in memory
Subtract from memory
Recall total in memory
Replace memory
Recall and clear

Memory Storage Keys (M0-M5)

In addition to the standard cumulative Memory (as described above),
your calculator has six independent Storage Registers—(M0)
through (M5)—that can be used to permanently store single, non-
cumulative values.
FUNCTION
Store single value in M0
Store single value in M1
Store single value in M2-M5
Clear register (e.g., M1)
Review stored value (e.g., M1)
Clear stored value*
*Perform a s x (Clear All) with caution, as it will clear any stored values from your
calculator's registers, although it will not change any of your preference settings.
Example:
Store 175 into M1 and recall the value:
KEYSTROKES
1 7 5 s ® 1
O o
® 1
Note: Repeat the above procedure for registers M0-M5, using digits 0 – 5 . This
example is to show you that a value stored in these memory registers will hold, even
when the calculator is turned off.
22 — M
ORTGAGE
KEYSTROKES
3 5 5 µ
2 5 5 µ
® µ
7 4 5 s µ
® µ
5 0 s ® µ
® ®
Q P
UALIFIER LUS
s ® 2, 3, 4 or 5
®
X2
P
DISPLAY
M 355.00
M 255.00
M 610.00
M 745.00
M -135.00
M 50.00
50.00
KEYSTROKES
s ® 0
s ® 1
0 s ® 1
® 1
s x
DISPLAY
M-1 175.00
0.00
M-1 175.00