Memory Storage Keys (M0-M5) - Calculated Industries 3430 User Manual

Memory Storage Keys (M0-M5)

In addition to the standard cumulative Memory (as described above),
your calculator has six independent Storage Registers — M0
through M5 — that can be used to permanently store single, non-
cumulative values. These values will be held when your calculator is
turned off, and will only clear when a "Clear All" is performed (via
s x).
You can replace a value in one of these Memory registers by storing
a new value in place of the stored value.
FUNCTION
Store single value in M0
Store single value in M1
Store single value in M2-M5
Clear register (e.g., M1)
Review stored value (e.g., M1)
Clear stored value*
*Perform a s x (Clear All) with caution, as it will clear any stored values from your
calculator's registers.
Example:
Store 175 into M1, recall the value, and then store a new value in
place of the first stored value:
STEPS
Store value in M1
Turn off, and then turn on
Recall value stored in M1
Replace stored value with
new value
KEYSTROKES
1 7 5 s ® 1
O o
® 1
1 5 0 s ® 1
KEYSTROKES
s ® 0
s ® 1
s ® 2, 3, 4 or 5
0 s ® 1
M-1 175.00
M-1 175.00
M-1 150.00
U ' G
SER S UIDE
® 1
s x
DISPLAY
0.00
— 25