Terminals - ADC OmniReach Methods And Procedures

ADCP-96-099 • Issue 1 • July 2007
The loop back plug serves as a dust cap and can remain in place until making a terminal
connection, or may be replaced with a standard MFC jack dust cap.

3 TERMINALS

The ADC ATS Multiport Service Terminal (MST) incorporates the OptiTap™ hardened
connector technology and is equipped with MFC plugs for rapid connection to the MFC on the
ATS cable assembly. The terminals are available with 10-feet and longer MFC tethers. The
terminal connector ports are clearly marked with port numbers for quick drop cable
connections. ADC ATS Multiport Service Terminals are designed for both aerial and below
ground applications. ADC ATS Multiport Service Terminals are shown in
• Available with 4, 6, 8, and 12 ports
• Terminal tether terminated with MFC plug
• Packaged with universal mounting bracket
• Default tether length is 10 feet (available up to 2000 feet)
When using the universal mounting bracket, the ADC MST is capable of being easily mounted
for many applications. Mounting options are shown in
• Aerial Strand
• Hand-hole
Page 10
© 2007, ADC Telecommunications, Inc.
Figure 17. ADC Multiport Service Terminals
Figure
Figure 18.
17.