Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Body Sculpture BE-1675-H
Summary of Contents for Body Sculpture BE-1675-H
- Page 1 BE-1675-H 2 IN 1 MAGNETIC ELLIPTICAL STRIDER www.body--sculpture.com...
- Page 3 Important Safety Information ………………… Exploded-View Assembly Drawing ………………..Parts List …………….…… 3 Assembly Instruction …..……………………………… 6 Exercise Instructions …………………………………… 9 Exercise Computer ……….………………………… 11 Exercise Notes ……….…………………………… 13...
- Page 4 Please keep this manual in a safe place for easy reference. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly.
- Page 5 10 12...
- Page 6 PARTS LIST PART PART DESCRIPTION DESCRIPTION Main Frame Carriage Bolt (M8 x15) Rear Stabilizer Lower Wire Rear End Cap Upper Wire Lower Cable Front Stabilizer Upper Cable Front End Cap Front post Domed Nut (M8) Tension Knob Curved Washer (Ø8) Computer Holder Bolt (M8 x 60) Computer...
- Page 7 Parts Description Parts Description Quantity Quantity NO.62X 2 PCS NO.10.11X2PC NO.6 X8PCS NO.30X4 PCS NO.14(L)X1 PCS NO.7 X 8PCS NO.14(R)X1 PCS NO.8X4 PCS NO.29 X 2PCS NO.49X4 PCS NO.47 X 2PCS NO.32X4 PCS NO.17 X 4PCS NO.16 X 4PCS NO.27X2 PCS NO.9 X 2PCS NO.41X2 PCS NO.22X4 PCS...
- Page 8 NO.56X 3PCS NO.50X4PCS NO.42X2PCS NO.57X 1PCS NO.54X1PCS NO.58X 1PCS NO.55X3PCS...
- Page 9 Attach the Rear and Front stabilizer (2 and 4) to the main frame (1) using four sets of M8 domed nuts (6), Ø8 Washers (7) and M8 X 60 Bolts (8). Take Front Post (37), assemble to the Main Frame (1), first connect the Lower Sensor Wire (33) to the Upper Sensor Wire (34), and attach the Upper...
- Page 10 31 22 Fixing the left and right pedal assembly to the Front Post (37) inset the connecting shaft (31) and then fit with Ø26xØ17.8 Wavy Washer (22), Ø25 Washer (42), Ø28x Ø8 Spring washer (29), Ø8 washer (28) and M8x 20 Fixing Bolt (27). Then connect the Pedal Frame (L&R) to the Crank using 1/2”...
- Page 11 NOTICE! This line mark on the seat post is for “STOP” position. Insert the Seat Post (pt.52) into the Seat Post housing and line up the holes (The correct height adjustment can be made when the bike is fully assembled) Secure the seat in position with the Adjustment Knob (pt.51).
- Page 12 Turn the tension knob by clockwise to increase the resistance. To decrease the resistance, turn the knob by anti-clockwise.
-
Page 13: Exercise Instructions
Using your 2 IN 1 MAGNETIC ELLIPTICAL STRIDER will provide you with several benefits. It will improve your physical fitness, tone your muscles and, in conjunction with a calorie-controlled diet, help you lose weight. 1.The Warm Up Phase This stage helps get the blood flowing around the body and the muscles working properly. It will also reduce the risk of cramp and muscle injury. -
Page 14: E X E R C I S E C O M P U T Er
SPECIFICATIONS: TIME……………..........00:00 -99:59 SPEED…………………………………..0.0-99.9KM/H or ML/H DISTANCE………………………….…….0.00-999.9KM or ML ODOMETER＊(option)……………………….0-9999KM or ML PULSE＊(option)…………………………………...40-240BPM CALORIES (CAL)…………….…………………...0-9999CAL KEY FUNCTIONS: MODE: This key lets you to select and lock on to a particular function you want. OPERATUION PROCEDURES: 1. AUTO ON/OFF: ※ The system turns on when any key is pressed or when it receives an signal input from the speed sensor. -
Page 15: Troubleshooting
TROUBLE SHOOTING: 1. Change the battery. To change the computer battery, please slide the computer from the computer holder, remove the battery cover on the back of the computer console, and remove the batteries. Replace with AA batteries. Finally put the cover back on the console, and slide the computer back on the computer holder. - Page 18 COPYRIGHT ©2010 BY BODY SCULPTURE INTERNATIONAL EUROPE LTD ALL RIGHTS RESERVED. UNAUTHORIZED DUPLICATION IS A VIOLATION OF LAW.
Need help?
Do you have a question about the BE-1675-H and is the answer not in the manual?
Questions and answers