Reconditioning directions, instruction and service for Volaris rollators
Wheels
Check that/if
The wheels are undamaged and the ball
bearing does not sound bad
The treads are not damaged
Check that the screws are not loose
If locking nuts are missing
The front fork is properly secured in the
upright
The front fork is undamaged
Eurovema Mobility AB, Baldersvägen 38, 332 35 GISLAVED, Sweden Phone: +46371 390 100, info@eurovema.se, www.eurovema.se, 1512|7. Article no.: 90-111.
To do
The wheel must run easily otherwise
replace wheel (bearing in poor condition)
Replace wheel
Tighten the screws (use glue, Loctite 270)
New locking nuts (use glue, Loctite 270)
Tighten the front fork properly with new
locking nuts (or use glue, Loctite 270)
Replace the front fork
Comments
On wheel change, also replace locking nuts
New locking nuts
OK
Need help?
Do you have a question about the Volaris Discovery and is the answer not in the manual?
Questions and answers