Scanner Utility - Plustek PS188 User Manual

4 MacAction Help
the pop-up menu that opens.
4. Click on the Start button to begin the calibration process.
5. The scanner pulls the calibration sheet through the scanner, which completes
this scanner calibration. After the calibration is complete, click OK.
1.3

Scanner Utility

To save power consumption, the scanner will enter the standby mode after it is
idle for a while. You may disable the standby mode or define an idle time for the
scanner to automatically enter the standby mode.
1. Right-click the icon
the pop-up menu that opens
2. In the Standby Mode section of the Scanner Utility window that opens,
click the button of your option:
a. To disable the Standby Mode: Click the button before Disable Standby
Mode.
b. To automatically enter the Standby Mode (Sleep): Click the button
before Sleep and then click the up or down arrows to set a default time
for the scanner to automatically enter the Standby Mode.
c. To automatically enter the Standby Mode (Hibernate): Click the button
before Hibernate and then click the up or down arrows to set a default
time for the scanner to automatically enter the Standby Mode. (This
function may or may not be available depending on the scanner model
you purchase.)
3. Click on OK button to save settings and exit.
· To completely shut down the scanner, press the power switch on the rear
of the scanner.
· If the scanner will not be used for a long period of time, shut down the
scanner and then disconnect the power cable from the power outlet.
in the Dock, and then choose Scanner Utility in
All rights are reserved.