The Scanner Utility Program - Plustek OPTICPRO 1248U User Manual

Note: If the test failed in any way, please read The Scanner Utility
Attention

The Scanner Utility Program

The Scanner Utility Program can help you get your new scanner up and running.
In addition, it contains a number of other features to help you tailor and control the
scanner.
Most significantly, the Scanner Utility Program checks to make sure that the
scanner software is properly installed and the scanner and computer are
communicating with each other.
Two other features of the Scanner Utility program are the scanning lamp
controls and the scanning position alignment utility. The Scanner Utility allows
you to turn the scanning lamp on and off, and define an idle time for the scanning
lamp to automatically turn itself off. Also, it allows you to define the exact position on
the scanning glass where scanning will begin.
Alignment
Window
The Scanner Utility program does NOT affect the quality of scanned images. It
Attention
interface.
Program section of this manual and follow the instructions therein.
is only used to establish a connection with the scanner. Settings that
affect the scanned image (i.e., color, size, readability, clarity, etc.) can
be found in the scanner software programs and especially the TWAIN
12
Turn Lamp
On/Off
Verify
Scan
Alignment
Position