Eiki lc-xip2600 Interactive Functions Manual page 4

Contents of the Accessory Bag
Accessories Introduction
Function Key on the "Light Pen"
Back side
Front side
Touch sensor pen tip
LED Lamp
Button: Mouse Left Key
How to use this
While the button is pressed or the tip is
pressed to a hard screen Infra Red signal
is emitted from the tip of the pen and the
CMOS sensor in the projector detects the
position of it. While the IR is emitted, the
LED Lamp also lights red.
1) Position the tip of pen on the screen.
2) Push the button to click the target as a
mouse or push and hold the pen to the
hard screen to draw a line as a pen.
CAUTION
Bottom cap with switch function.
Because the tip has a sensor switch inside,
when it is tilted or pushed, it consumes
battery. In order to prevent this happens
while transportation the bottom cap is given
with switch function. By rotating the cap by
90 degree counterclockwise, the above can
be prevented.
iii