Eiki lc-xip2600 Interactive Functions Manual page 19

Operation Guide for Mac OS
Step 3: Push the button on the "Pointer" or "Light Pen" (pending on
the screen size) while placing the tip on the center of green
target. The color of target changes black from green. Then
next green target appears on the upper middle area of the
screen. Repeat the same until all of 9 targets change black.
In order to carry out the calibration smoothly be sure to
expose the tip of the "Pointer" or "Light Pen" to the sensor
near the projection lens. If the tip is lit up by the light from
the projector, the sensor can detect the tip's position well.
Note:
If the screen and XIP2600 stay where they are and if the same PC is
used with the same resolution, Distance setting or Calibration is no
longer required from next time.
15