IKEA HYGIENISK Manual page 16

ENGLISH
When you use multi-tablets that contain
rinse aid, it is not necessary to fill the rinse
aid dispenser. Set the rinse aid dispenser to
the lowest position.
How to select and start a programme
1. Press the button dedicated to the
programme you want to set.
• The light related to the button is on.
• The display shows the programme
duration.
2. Activate applicable options if desired.
3. Close the appliance door to start the
programme.
How to select and start the
programme
1. To select , press and hold
seconds.
• The light related to the button is on.
• The display shows the programme
duration.
Options are not applicable to this
programme.
2. Close the appliance door to start the
programme.
How to activate options
1. Select a programme.
2. Press the button dedicated to the option
you want to activate.
• The light related to the button is on.
• The display shows the updated
programme duration.
By default, options must be
activated every time before you
start a programme.
If the latest programme selection
is enabled, the saved options are
activated automatically along with
the programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other.
Activating options often increases
the water and energy
consumption as well as the
programme duration.
How to select and start the
programme AUTO
1. Press
• The light related to the button is on.
• The display shows the programme
duration.
Options are not applicable to this
for 3
programme.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and
adjusts a suitable wash cycle. During the
cycle, the sensors operate several times and
the initial programme duration can
decrease.
How to delay the start of a
programme
1. Select a programme.
2. Press
shows the desired delay time (from 1 to
24 hours).
The light related to the button is on.
3. Close the appliance door to start the
countdown.
.
repeatedly until the display
16