English: CS3 User's Guide, Chapter 4
USER'S GUIDE
Data LED
Manual LED
Alarm LED
4–2
The Data LED indicates the current status of the print data process.
LED
Printer status
The printer has no print data.
Off
The printer is receiving data from the computer or the
Blinking
printer is processing data in memory.
Print data remains in the printer memory. If the Data LED
On
is on for a long period of time and nothing has printed,
you need to press the FF/Cont button to print the
remaining data.
This LED blinks with the Alarm LED to indicate an ink empty error. See
"Adding Ink" in Chapter 6 and "Operator Calls" in Chapter 7.
The Manual LED indicates the current paper source.
LED
Printer status
Sheet Feeder mode
Off
The printer is waiting for paper to be loaded in the manual
Blinking
feed slot.
Manual feed mode
On
This LED blinks with the Alarm LED to indicate a Maintenance paper empty or
no Maintenance cassette error. See "Maintenance paper" in Chapter 6 and
"Operator Calls" in Chapter 7.
The Alarm LED blinks to indicate a printer error such as cover open, memory
full or interface error etc. Also, the following combination of LEDs indicate
errors.
Alarm + Paper Paper empty or Paper
Jam
Alarm + Ink
Ink empty
Alarm + Filter
Maintenance paper
empty or No
maintenance cassette
Add paper or Clear paper jam,
and then press the FF/Cont
button.
Add ink into the ink reservoir and
then press the FF/Cont button.
Replace Maintenance paper with a
new one or re-install the
maintenance cassette correctly.