Table of Contents
Advertisement
English: HS3 User's Guide, Chapter 5
Chapter 5 OPTIONS
MODULAR I/O CARD
This printer has a modular input/output (MIO) interface slot on the rear panel.
This slot allows you to install a commercial MIO-compatible sharing/network
card.
For more information about MIO cards, consult the dealer where you purchased
this printer.
When you want to install an MIO card, follow these steps:
1. Turn off the printer and unplug the power cord from the wall socket.
Note
Be sure to turn off the power to the printer before installing or removing the
MIO card.
2. Remove the two screws and cover plate from the MIO interface slot.
3. Unpack the MIO card and hold it by the edge of the card.
Note
Do not touch the card surface. If static electricity collects, it can damage the
card.
4. Insert the card until it is securely seated.
5 Secure the MIO card with the two captive screws on the card.
6. Retain the cover plate and two screws removed in 2 in case you want to
remove the MIO card later.
Fig. 5-1 Installing the MIO Card
CHAPTER 5 OPTIONS
MIO Card
5–1
Advertisement
Table of Contents
