Table of Contents
Advertisement
English: HS3 User's Guide, Chapter 6
USER'S GUIDE
6–8
3. Hold the side of the ink holder and place the ink holder onto the top of the
ink reservoir. Be sure to add the correct color ink cartridge to the correct
reservoir. The ink holders are keyed to prevent incorrect insertion of the ink
holder. Do not force the ink holder into the top of the ink reservoir.
Fig. 6-13 Using the ink holder
Note
Add ink to the printer by using the ink holder. Do not remove ink blocks
from the holder.
4. Push the center of the ink holder. The ink blocks are dropped into the ink
reservoir.
Fig. 6-14 Adding the ink blocks
Note
When you want to add two or more holders of ink, close the ink reservoir cover
after adding each holder of ink (3 blocks). Closing the cover pushes the added
ink blocks down, so that you can add the next holder full of ink blocks. Open
the cover each time you add the next holder of ink blocks. Then close the
reservoir.
5. Close the ink reservoir cover.
Advertisement
Table of Contents
