Table of Contents
Advertisement
English: HS3 User's Guide, Chapter 2
3. Move the paper guide to the paper width. (
4. Close the cover of the sheet feeder. ( )
(2)
Fig. 2-5 Moving the Paper Guide and Closing the Feeder
Note
If the sheet feeder runs out of paper, the Alarm and Paper LEDs blink to alert
you to a paper empty error. You have to load paper and push the FF/Cont button
to cancel the alarm and continue printing. If paper jams in the printer, the Alarm
and Paper LEDs also blink. In that case, clear it referring to "PAPER JAMS" in
Chapter 7.
Note
You have to select the proper paper source, paper size, and orientation in
your application software.
If your application software does not support your custom paper size, select
the next larger paper size to the custom size, then adjust the print area by
changing the margins in your application software.
CHAPTER 2 PAPER HANDLING
)
(1)
2–7
Advertisement
Table of Contents
