Page 1
ASSEMBLY INSTRUCTIONS ® RiverRidge Ashland Single Door Wall Cabinet ITEM# 06-088 White ITEM# 06-089 Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury.
Page 2
THIS CABINET WILL HOLD UP TO 10 POUNDS PER SHELF OR A TOTAL OF 20 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 10 POUNDS. LOADING WITH MORE THAN 10 POUNDS PER SHELF MAY CAUSE DAMAGE TO THE CABINET OR CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST DESCRIPTION Top Board Left Side Panel Right Side Panel Fixed Shelf Rear Cross Bar Bottom Board Door Back Board...
Page 4
PARTS DESCRIPTION 6PCS Cam Bolt 6PCS Cam Lock 16PCS Wood Dowel 2PCS Screw (3x14mm) Magnet 10PCS Screw (3x10mm) 2PCS Metal Hinge Magnet Plate Machine Screw (4x20mm) Knob 14PCS Screw (2.5x12mm) 2PCS Plastic Anchor 2PCS Screw (4x45mm) Wall Mounting Paper Template TOOLS NEEDED FOR ASSEMBLY: FLAT &...
Page 5
STEP 1 Screw 1 cam bolt (A) into cam bolt hole on left side panel (2). Screw 1 cam bolt (A) into cam bolt hole on right side panel (3). Attach 2 metal hinges (G) to right side panel (3) by inserting 4 screws (F) through holes on metal hinges (G), then tighten to right side panel (3).
Page 6
STEP 3 1. Screw 2 cam bolts (A) into cam bolt holes on bottom board (6). 2. Screw 2 cam bolts (A) into cam bolt holes on top board (1). 3. Attach 1 magnet (E) to top board (1) by inserting 2 screws (D) through holes on magnet (E), then tighten to top board (1).
Page 7
STEP 5 1. Attach back board (8) to pre-assembled cabinet by inserting 14 screws (K) through holes on back board (8), then tighten to back of cabinet. STEP 6 1. Attach magnet plate (H) to door (7) by inserting 2 screws (F) through holes on magnet plate (H), then tighten to door (7).
Page 8
STEP 7 1. Attach door (7) to right side panel (3) by inserting 4 screws (F) through holes on metal hinges, then tighten to right side panel (3). STEP 8 Option #1: Securing to Drywall Using wall mounting paper template to determine position, screw 2 plastic anchors (L) into drywall.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth.
Page 10
Thank you for purchasing this RiverRidge Home item. We hope you ® enjoy it and consider purchasing other RiverRidge items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States.
Need help?
Do you have a question about the Ashland 06-088 and is the answer not in the manual?
Questions and answers