Specifications - LaserPoint Plus2 Instruction Manual

17. Instrument specifications
Detector Compatibility
Input Ranges
A to D Sampling rate
A to D Resolution
Electrical accuracy
Electrical Input Noise
Input Offset Voltage drift
Dynamic Range
Analogue Output
Analogue Output Accuracy
Display
Display Digit Height
Bargraph Segments
Instrument Dimensions
Weight
Battery
Battery run time
Battery charge time
Power Supply- Battery Charger
Charge Current
Operating Temperature Range
Storage Temperature Range
Max relative humidity
International Regulations
LaserPoint s.r.l.- Plus2 Power & Energy Meter Instruction Manual - All Rights Reserved
Thermopile, Photodiode and OEM LaserPoint Sensor Heads
7 mV – 700mV full scale, in 9 ranges
64 Hz
23 bit ADC resolution, 16bit processing resolution
± 0.5%
500nV
-4nV/°C (typical)
8 decades
0.025 - 2 Volt, with 16-bit (0.0015% resolution.)
±0.1% ±2mV relative to display
4.3" TFT LCD high brightness, 480 x 272 resolution, resistive touch
panel 96 x 55 mm HxW
15mm Standard Operation - 25mm Full Screen Operation
250 pixel width
170 x 100 x 36-50 (mm) HxWxD
380 g
Built in rechargeable Li-Pol. 3.7V 3700mAh
> 9 hours in normal operation
> 15 hours in stand-by display mode
7-8 hours not working
15-20 hours working
Input 100/240Vac 50/60Hz Out 5Vdc 1A, (Plus 2 can be charged
through a PC USB port).
0.5A
+5° to +40°C
-20° to 70°C
70%
, RoHS compliant.
20