Technical Specifications - LaserPoint Cronos Series Instruction Manual

Technical Specifications

Maximum Measurable Power (W)
Minimum Measurable Power @ ±4% Accuracy
(W)
Absolute Minimum Measurable Power (W)
Power density damage threshold @ full scale at
CO wavelength (W/cm
2
Repeatability
Measurement Accuracy
Resolution (W)
Maximum allowable absorber temp. (°C)
Time to measure and display data at full scale
power (s)
Time to measure and display data at min. scale
power (s)
Power consumption in On status (mW)
Power consumption in Off status ( W)
Power supply (2x AA Batteries) (V)
Continuous operation
replacement (h)
Operating temperature range (°C)
Storage temperature range (°C)
Weight (g)
Length with handle (mm)
(*)
Specifications subject to change without notice.
(1) Individually compared against a NIST or PTB reference.
Warranty
All Laser Point instruments are warranted against defect in material and
workmanship for 3 Years after invoice date. During the warranty period Laser Point
will repair, or at his sole option, replace at no charge components that prove to be
defective, provided the parts are returned, shipping prepaid, to Laser Point Customer
Service.
This warranty does not apply if the instrument or any accessory has been damaged
by accident or misuse, or as a result of service or modification by other body than
Laser Point. No warranty is given by Laser Point on coatings and battery pack.
LaserPoint s.r.l. – Cronos Instruction Manual – All Rights are Reserved
(*)
Parameter
2
)
without
:
LP1.5 LP5.0 LP10
1500
150
30
2600
±2%
battery
480
300
5000 10000
(1) (1)
500 1000
100 200
1900 1500
±5% ±5%
±4%
1
150
10
15
26
25
3
200
10 to 40
-10 to 60
950 1300
310 320
8
(1)