Jayco Embark 2022 Owner's Manual page 44

Table of Contents

Advertisement

Section 4: Vehicle Operation
Secure Operation
Enter your 5-digit Access Code, keypad will double beep to indicate secure operation. After
entering an Access Code, the keypad is enabled for (5) seconds and the next button pressed
will initiate a secure operation.
Secure operations are:
(1/2) button unlocks entry doors
(3/4) button – no function
(5/6) button - no function
(7/8) button unlocks entry doors.
(9/0) Activates light for (5) minutes. Pressing (9/0) again while light is on will turn it off.
Driver and Passenger Seat
Do not adjust the seat while driving. After adjusting the seat, make sure
that it is locked in position. To ensure that the seat is locked securely, try
to move the seat forward or backward without using the adjusting lever
or button. Do not put packages, pets or other objects between the driver's
and front passenger co-captain's seat.
If equipped with reclining seats: to minimize the risk of personal injury
in the event of a collision or sudden stop, always keep both the driver's
captain and passenger co-captain seat backs in a nearly upright position
while the motor home is moving. The protection provided by the seat
belts may be reduced significantly when the seat back is reclined. Reclin-
ing the seats while the motor home is moving may result in serious injury.
If equipped with power seats: keep hands and feet clear of the power seat
while in operating the power feature.
NOTE: The driver's and front passenger seat must be locked in the
forward facing position while the motor home is in motion.
6-Way Power Seat (if so equipped)
Use the controls to slide the 6-way power seat to the desired position. Release the control,
and the seat will lock at that position. Features may include a 3-point adjustable seat belt,
lumbar support, swivel, slide and reclining capabilities. (Not all of these features will be
available in all motor home models).
To rotate the driver/passenger seat (if so equipped)
To face the driver or front passenger seat toward the rear of the vehicle, pull the seat swivel
release lever up and rotate the seat. To return the seat to the original position, rotate seat
back to the driving position until you hear a click and the seat locks into position.
38
Maintenance Record
Table of Contents

Advertisement

Table of Contents
loading

Table of Contents