Jayco Embark 2022 Owner's Manual page 150

Section 12: Interior
Put the end of the rod in the bracket under the bed platform.
To lower the platform, release the prop rod from the bracket under the bed plat-
form, re-attach the prop rod to the holder on the bed base,
Lower the platform slowly until closed.
Gas Struts (if so equipped)
On certain models, the bed platform may be equipped with gas struts to assist with easy ac-
cess to storage area.
Grasp the ledge at the foot of the bed and lift carefully.
Two gas struts will hold the bed platform open allowing access to the storage area.
To close, carefully push down on the bed, slowly easing it to the closed position.
Power Bunk Bed (if so equipped)
Your motorhome may be equipped with a power bunk bed. It may include a wood lad-
der that hooks on to the side of the bed in order to access the upper bunk. UPPER BUNK
MUST BE AT THE LOWEST POSITION TO USE THE LADDER.
The upper bunk has preset limits as to how far it can be raised and lowered. The lower bunk
is fixed in position and does not move.
Operation:
To operate the bed insert the key, and turn it to the ON position. Press the UP or DOWN
arrow button. When upper bunk is positioned where you want it, turn the key to the OFF
position. Remove the key to prevent accidental movement of the bed. The bunk bed ladder
must be positioned firmly in place.
144
Maintenance Record Table of Contents