Samsung Electronics DVM Series Technical Manual page 188

2-2. 4-way cassette type
(1) Accessories
Wireless remote Battery (2)
controller (1)
4x12 Tapped Bolt (4)
screw (2)
(2) Installation
1) Open the electrical component box cover by removing the screws.
2) Install the panel using two hooks on the both sides of the indoor unit.
3) Connect the cables of the panel to the PCB as shown.
4) Close the electrical component box cover and tighten the screws.
5) Secure the panel to the indoor unit using the bolts(4EA).
There are four types of air blocking kits. Block the air
outlet(s) with one or more kits depending on the situation,
then install insulation to block the airflow completely.
Remote control Owner's
holder (1) instructions (1)
Air blocking kit (1)
Must be separately purchased
15
Owner's
instructions (1)
Panel
Panel fixing holes
Hook and Eye
Eye
Air blocking
kit