Cassette Feed - Brother HL-2600CN Series User Manual

CHAPTER 3 BEFORE WORKING WITH THE PRINTER
C F
C F
C F
A S S E T T E
A S S E T T E
A S S E T T E
The printer can feed paper from the Paper Cassette, Optional Lower Paper
Tray or Optional Legal Cassette.
Note
When you load paper into the Paper Cassette, note the following:
•
If your application software supports paper size selection on the print
menu, you can select it through the software. If your application software
does not support it, you can set the paper size with the printer driver or
by using the control panel.
•
The paper size has been factory set to letter for 120V models or A4 for
220/240V models. If you want to use other sizes of paper or envelopes,
change the paper size setting in PAGE FORMAT MODE, which is in
FORMAT MODE by using the control panel. For paper size selection,
see "PRINT MENU" in Chapter
•
If you use pre-printed paper in the cassettes, please note that the paper
should be loaded with the printed side face up and the top edge of the
paper at the back of the cassette.
The printer automatically detects the paper size you have loaded into the
Paper Cassette. If you load a different size of paper into the paper cassette
from the size that is selected, by using the control panel or in your
application software you can change the paper size setting, the printer will
prompt you to load the correct size of paper as follows:
E E D
E E D
E E D
SIZE MISMATCH
Paper mismatch between the Printer and the
Printer Driver setting. Load Paper <size> size
into Tray <1/2>
4.
3-12