Brother HL-2600CN Series User Manual page 160

CHAPTER 5 MAINTENANCE
Insert the connection cable into
8.
the printer's connector.
Pull out the Upper Paper
9.
Cassette, and then connect the
Lower Tray Unit with the printer
by sliding the locking clip to the
right on the top surface of the
Lower Tray Unit.
Install the right hand side cover
10.
into the right side of the Lower
Tray Unit by first fitting the hook
at the front.
Install the left hand side cover by
fitting the hole at the rear side of
the side cover to the shaft of the
Lower Tray Unit. Close the side
cover by fitting the notch to the
hook of the Lower Tray Unit.
5-48
Fig. 5-58
Fig. 5-59
Fig. 5-60