Brother HL-2600CN Series User Manual page 176

CHAPTER 5 MAINTENANCE
Note
•
There might be some DIMMs that will not work with this printer.
•
For more information, consult the dealer where you purchased the
printer.
•
For the latest information: http://solutions.brother.com
To install DIMMs, follow these steps:
Turn off the printer and unplug the power cord from the AC outlet.
1.
Note
Be sure to turn off the power to the printer before installing or removing the
DIMMs.
Unscrew the two screws
2.
securing the rear plate of the
main controller board, and then
pull out the main controller
board.
Unpack the DIMM and hold it by its edges.
3.
!
Caution
Do not touch the memory chips and the surface of the main controller
board. If static electricity collects, it may damage these electrical parts.
5-64
Fig. 5-85