Duplex Unit (Dx-2600) - Brother HL-2600CN Series User Manual

CHAPTER 5 MAINTENANCE
Remove the Protective Parts as
5.
shown (do not remove ALL the
Protective Parts of the Duplex Unit).
Pull out the connection cable located
6.
at the bottom left hand side of the
Duplex Unit.
Use the handholds of the Duplex Unit
7.
to lift it up.
Note
Ensure that the Duplex Cover Top Assembly is correctly aligned and latched
with the lower part of the Duplex Unit
!
Caution
When lifting up the Duplex Unit, be careful NOT to nip your fingers between
the Duplex top assembly and the lower assembly.
5-52
Fig. 5-65
Fig. 5-66
Fig. 5-67