Bunn G9-2T DBC Installation And Operating Manual page 7

SELECTING COFFEE NAMES (Continued)
NOTE: If a number is chosen from the chart below, and entered into the grinder, check to be sure the number
entered represents the name of the coffee on the chart.
1. Grind into the funnel then insert the funnel into the brewer funnel rails.
2. The display will read the coffee name that was ground into the funnel.
3. If this name is different from the name on the chart, the grinder's memory needs to be reset.
Resetting the grinder memory (to match the chart below)
1. Unplug grinder from the outlet.
2. Press in and hold both the STOP and the GRIND buttons and plug cordset into the outlet. After a short pause,
the display will show a series of 3 dashes followed by a series of 9 dashes.
3. When the 9 dashes appear, release the STOP and GRIND buttons, then press and release the STOP button.
4. The display will count down then return to the normal operating mode. The grinder should now be set to
match the coffee names with the numbers on the chart below.
NUMBER NAME
1 Regular
2 Decaf
3 Colombian
4 Colombia Supremo
5 Costa Rican
6 Ethiopian
7 Kona
8 Kenya AA
9 Sumatran
10 French Roast
11 Italian Roast
12 Mocha Java
13 House Blend
14 Breakfast Blend
COFFEE CHART
NUMBER
15 Jamaica Blue Mtn
16 Guatemalan
17 Light Roast
18 Dark Roast
19 Espresso
20 Amaretto
21 Hazelnut
22 French Vanilla
23 Irish Creme
24 Vanilla Nut
25 Caramel
26 Raspberry
27 Almond
28 Dark Mtn Roast
7
NAME
33736 030205