Bunn G92T Use & Care Instructions

(Includes G92T DBC Grinder and DUAL SH DBC Brewer with Smart Funnel™)

COFFEE BREWING

STEP 1
Insert a BUNN filter into
®
the funnel.
STEP 6
Place an empty server
under the funnel.

CLEANING

STEP 1
Remove the sprayhead.
34481.0000B 08/12 ©2003 Bunn-O-Matic Corporation
USE & CARE INSTRUCTIONS for BrewWISE
STEP 2
Select the desired batch
size and coffee flavor on
the grinder. It is not nec-
essary to select a size on
the brewer.
STEP 7
Press the ON/OFF button
to ON.
STEP 2
Clean mineral deposits and
rinse. Using a paper clip,
make sure all holes are
open. Replace sprayhead.
STEP 3
Grind the proper amount of
fresh coffee into the Smart
Funnel™ using the G92-
HD with Smart Funnel™
operation.
STEP 8
A batch size must be cho-
sen at the brewer when
grounds are not obtained
from a Smart Funnel™
compatible grinder.
STEP 3
Reinstall the sprayhead.
System
SM
STEP 4
Level grounds by gently
shaking.
STEP 9
Momentarily press and
release the BREW button.
STEP 4
Use a clean damp cloth
rinsed in nonabrasive,
mild detergent to clean all
surfaces.
STEP 5
Slide funnel into the fun-
nel rails. The brewer reads
the batch size and flavor
ground through a chip in
the funnel handle and will
automatically select the
correct settings to brew.
STEP 10
Discard the grounds and
filter when brewing is
completed.
STEP 5
Remove the lid of the
server.
34481 011403