Specification - Honeywell Pro-Watch 7000 Install Manual

Specification

The Input Board is for use in low voltage, class 2 circuits only.
Primary power:
12VDC + 10%, 250mA maximum
Relay contacts:
Relays 0 and 1 outputs, Form-C, 2A @ 30VDC, resistive
Inputs:
•
•
Wire requirements:
Power
RS-485
Alarm inputs
Outputs
Mechanical:
Dimension
Weight
Environment:
Temperature
Humidity
10 PW-7000 Input Module (PW7K1IN) Installation Guide, Document 800-25674V1
16 supervised, End of Line resistors 1k ohm ± 1% tolerance
2 unsupervised dedicated inputs
1 twisted pair, 18AWG
24AWG, 4,000 feet (1,200 m) max., 2-twisted pair with shield
(120 ohms, 23pf) (Belden 9842 or equiv.)
1 twisted pair per input, 30 ohms max.
As required for the load
5.5" (140mm) W x 9" (229mm) L x 1" (25mm) H
12 oz. (340g) nominal
0°C to +49°C, operating, -55°C to +85°C, storage
0% to 85% RHNC