Disclaimer - Honeywell Pro-Watch 7000 Install Manual

Note: See the Remote Enclosure Installation manuals PW5K2ENC1/PW5K2ENC2 or
PW5K1ENC3 for installation instructions.
Warning:
EARTH ground all enclosures for proper installation.
Warning:
Use suppressors on all door strikes. Use S-4 suppressors for installation. Honeywell
recommends only DC strikes.
Caution:
IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM MUST BE FILED WITH THE
COMMERCIAL CARRIER RESPONSIBLE.
Caution:
Electrostatic discharge can damage CMOS integrated circuits and modules. To prevent
damage, always follow these procedures:
•
including completed reader assemblies.
•
workstations consist of a desk mat, a floor mat, and an ESD wrist strap. Workstations are
available from various vendors.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his
own expense.
Note: This document and the data in it shall not be duplicated, used, or disclosed to others
for procurement or manufacture, except as authorized by and with the written
permission of, Honeywell, Inc. The information contained in this document or in the
product itself is considered the exclusive property and trade secrets of Honeywell,
Inc. Copyright laws of the United States protect all information in this document or in
the software product itself.
Note: Any use of this product is subject to the terms and acceptance of the Honeywell, Inc.
Software Agreement. Please request a copy from Honeywell, Inc., and review the
agreement carefully.

Disclaimer

Product Liability; Mutual Indemnification
In the event that a Customer receives a claim that a Product or any component
thereof has caused personal injury or damage to property of others, Customer
shall immediately notify Honeywell in writing of all such claims. Honeywell shall
defend or settle such claims and shall indemnify and hold Customer harmless for
iv PW-7000 Input Module (PW7K1IN) Installation Guide, Document 800-25674V1
Use static shield packaging and containers to transport all electronic components,
Handle all ESD sensitive components at an approved static-controlled workstation. These