Extech Instruments MultiLog ML720 User Manual page 13

Datalogging
Datalogging Basics
The ML720 can store up to 43,000 readings automatically. These
readings can be viewed on the LCD display or transferred to a PC using
the PC interface cable and Windows
Datalogging
Note: Each time the datalogging "Strt" process is initiated, existing data
will be erased. Always review or download stored data before beginning a
new recording session.
1. Press the
setting is 0.05 seconds.
2. Press the up/down arrow keys to select the desired sample rate.
3. Press the
4. Press and hold the
appears in the display to start the data logging process.
5. The bargraph display will appear with a single oscillating pointer to
indicate the datalogging process is in progress.
6. Press the
"H" will appear in the display.
7. Press again to continue datalogging. "Cont" will appear momentarily
in the display.
8. Press the SELECT key to toggle between the measured value display
and the data list item number display.
9. Press and hold the
display to stop the data logging process and store the data.
timer key to enter the sample rate mode. The default
timer key to store the selected sample rate.
"Strt, PAUS, StoP" key for 1 second until "Strt"
"Strt, PAUS, StoP" key to pause datalogging. A blinking
key for 1 second until "StoP" appears in the
TM
software included.
14