Advertisement
With the "+" and "–" buttons you can choose between the various parameters.
If you wish to adjust a parameter, push the "set" button again and adjust the value
with the "+" and "–" buttons up and downward.
Pressing the "set" button again will save the adjustment.
Turning para-
Parameter-
meters
ID
Turning
fre-
F1
quency
Turning
dura-
F2
tion
Display of days
F3
Table 5: Adjustment of the turning via the "set" and "–" buttons
4. "+" and "–": Holding both pushed for a longer duration (approx. 8 seconds) will reset
the incubator back to factory settings, there will be a peeping sound
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Adjustment range
Standard
setting
0–999 min
90 min
0–999 sec
10 sec
0–200 days
01 day
Item 51073, 51269
Note
When adjusting to 0, no turn-
ing takes place.
When adjusting to 0, no turn-
ing takes place.
With every new breeding pro-
cess,
this
needs
switched back to 0.
to
be
Page 13
12
2020-1
Advertisement
