Advertisement
Quick Links
Operation Manual
Automatic Incubator
51185, 51186
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ slightly.
Advertisement
Related Manuals for WilTec 51185
Summary of Contents for WilTec 51185
- Page 1 Operation Manual Automatic Incubator 51185, 51186 Similar to image, may vary depending on model Read and follow the operating instructions and safety information before use. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ slightly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Adjustable temperature control Hygrometer to determine the air humidity Humidity display Temperature display Automatic turning system Turning/ breeding display Item no. 51185: with LED egg candler © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 4 Not disinfecting the incubator enables the growth of these and poses a threat to the entire brood. Thus: Before the first breeding and after every new breeding, thoroughly disinfect the incubator. © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 4 http://www.WilTec.de...
- Page 5 The required air humidity varies again depending on the brooded type of animal and needs to be changed during the breeding process. Please inform yourself beforehand, which requirements need to be met in the incubator. Here are two examples: © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 5 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 Important: In the last two to three days of the breeding process the eggs must not be turned any longer. As the chicks are finding a hatching position, thus the position must not be changed any more. © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 6 http://www.WilTec.de...
- Page 7 Leave the incubators run for at least 24 hours without any eggs inside and get accustomed to the functions of the incubator. Make sure that all parameters can be adjusted without a prob- © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 7 http://www.WilTec.de...
- Page 8 Thus, ensure that the humidity is high enough, as soon as the eggs are placed still and the turning mechanism is switched off. During the hatch- © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 8 http://www.WilTec.de...
- Page 9 Besides the display and the “on/off” button, there are four more buttons with which the incubator is operated (see the section “Description of the function buttons”). The incubator with the item no. 51185 has one more button, “egg candler” (9). This allows to screen the eggs.
- Page 10 Only with item 51185: 9 the egg candler currently is in use. Description of the function buttons The incubator has four buttons, which are required for the operation of the incubator. The buttons and their possible combinations will be explained in the following paragraph.
- Page 11 Press and hold “Reset” for approx. 3 s, pull out the mains plug and plug it in again. The display shows a countdown to 0. After the countdown has elapsed, the number of breeding days is reset. © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 11 http://www.WilTec.de...
- Page 12 (c) See 3 (b); ensure to insert the eggs (c) Eggs turned improper with the wider part first Chicks with breeding inlay too slippery/ smooth Use wire inlay or cover the slippery/ © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 12 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 13 (a) Incubator needs to be replaced incubator on, the midity fuse blows every (b) Short circuit due to broken fan (b) Fan needs to be exchanged time © by WilTec Wildanger Technik GmbH Item 51185, 51186 Page 13 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 14 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with domestic waste.