Networking Videohub With Ethernet - Blackmagicdesign Videohub 288 Installation And Operation Manual

Hardware Installation
43

Networking Videohub with Ethernet

Many Videohub models have an Ethernet port and can connect directly to your Ethernet network switch
and then to any computer on your local area IP based network. The integrated "Videohub Server" is used
when router control is performed via Ethernet. This contrasts to the USB connection method which requires
a separate computer to act as the Videohub Server.
You will need to carry out the following steps to connect Videohub to the local area IP based network.
Step 1. Securely connect and power on all of the power supplies included with your Videohub.
Step 2. Connect the Videohub router to the network switch with a standard RJ45 Ethernet cable.
Network Switch
Ethernet
Videohub connected via Ethernet networking
Client Computers