Technical Parameter - Techly IDATA HDMI-SDI2 User Manual

HDMI to SDI Converter
3. If the input source HDMI resolution is compliant to the resolution
SDI display supported, SDI signal can be output via SDI port,
and it can be split into two SDI signal to connect to different SDI
display simultaneously.
FaQ
Q: No signal output after connecting as required
a:
1) Check the HDMI input source devices output channel is HDMI.
2) Check if the HDMI resolution is compliant to the resolution SDI
display supported (for example: HDMI resolution 480p may not
be identified by the SDI display or there may be no SDI out).
3) Check whether the SDI ports of converter and SDI display are
connected well.

teCHniCaL ParaMeter

Power adapter
HdMi input resolutions
Sdi out resolutions
Sdi format
impedance
Power consumption
dimension
operating temperature
Maintenance: clean only with a dry cloth. Do not use cleaning
solvents or abrasives.
Warranty: no guarantee or liability can be accepted for any changes
and modifications of the product or damage caused due to incorrect
use of this product.
In compliance with EU Directive WEEE this product is marked
with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste.
There is a separate collections system for these products in
compliance with WEEE directive, otherwise contaminative and
hazardous substances can pollute the environment.
With the CE sign, Techly
to the basic European standards and directives.
DC 5V1A, applicable for voltage from 5V--
-36V; DC 12V/1A is recommended
480i@60HZ, 576i@50Hz, 720p@50Hz,
720p@60Hz, 1080i@50Hz, 1080i@60Hz,
1080p@24Hz@25Hz@30Hz@50Hz@60Hz
480i@60HZ, 576i@50Hz, 720p@50Hz,
720p@60Hz, 1080i@50Hz, 1080i@60Hz,
1080p@24Hz@25Hz@30Hz@50Hz@60Hz
SD-SDI/HD-SDI/3G-SDI
75 Ω
<600mA (DC5V)
130x80x23.5mm
0°C ~ 60°C
ensures that the product is conformed
®
EN
7