Simons Voss Technologies GatewayNode 2 Manual page 5

GatewayNode 2
Damage as a result of mechanical impact
This product contains electronic components that may be damaged by mechanical impacts of
any kind.
1. Avoid touching the electronics.
2. Avoid other mechanical influences on the electronics.
Damage as a result of overcurrent or overvoltage
This product contains electronic components that may be damaged by excessive current or
voltage.
Do not exceed the maximum permissible voltages and/or currents.

Damage due to polarity reversal
This product contains electronic components that may be damaged by reverse polarity of the
power source.
Do not reverse the polarity of the voltage source (batteries or mains adapters).

Operational malfunction due to radio interference
This product may be affected by electromagnetic or magnetic interference.
Do not mount or place the product directly next to devices that could cause electromagnetic

or magnetic interference (switching power supplies!).
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can greatly reduce the range of the
product.
Do not mount or place the product on or near metallic surfaces.

Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.

Incorrect installation
SimonsVoss Technologies GmbH accepts no liability for damage caused to doors or compon-
ents due to incorrect fitting or installation.
Modifications or further technical developments cannot be excluded and may be implemented
without notice.
(Manual)
NOTE
Intended use
SmartIntego-products are designed exclusively for opening and closing
doors and similar objects.
Do not use SmartIntego products for any other purposes.

2. General safety instructions
5 / 27