Agilent Technologies Infiniium 9000 Series User Manual page 52

Using the Oscilloscope
Figure 3-3
See more
measurements
Turn off any
measurements
that are running
(use Clear display
Run
to reset/restart
Stop
measurement
statistics)
Infiniium Oscilloscope Bottom of Display
To make it easy to see which controls affect each waveform, the oscilloscope
uses color consistently throughout the graphical interface. These colors match
the ones used on the front panel channel inputs. For example, the color of the
waveform for channel 1 matches the color for that channel. If channel 1 is the
trigger signal, all of the trigger configuration items, including the trigger level
reference icon (at the right side of the waveform display area), will match that
color. The buttons associated with that channel, vertical scaling and offset
settings, ground reference indicator, and measurements done on that channel
also have the same color.
All changes made to the front panel settings are reflected in the graphical user
interface, and changes made using the graphical interface are reflected in the
front panel where applicable. Use whichever interface is easiest for you in a
52
Single
Clear
Access the
display
Horizontal Setup
dialog box
Print
screen
Waveform
Brightness
Set
Set
horizontal
horizontal
scale position
(delay)
Access
Set
the
trigger
Trigger
level
Setup
dialog
box